Legal:Decision of the Board of the Eurasian Economic Commission No 108 of August 29, 2017
On the list of standards containing rules and methods of studies (tests) and measurements, including rules of taking samples, required to apply and meet the requirements of the Technical Regulation of the Eurasian Economic Union “On Limitation of Use of Hazardous Substances in Electrical and Radio-Electronic Products” (TR EAEU 037/2016), and to assess conformity of products that are subject to the technical regulation
In furtherance of paragraph 4 of the Protocol of technical regulation in the Eurasian Economic Union (Annex N 9 to the Treaty on the Eurasian Economic Union dd. May 29, 2014), and paragraph 5 of the Annex N 2 to the Rules of Procedure of the Eurasian Economic Commission, approved by the Decision of the Supreme Eurasian Economic Board on December 23, 2014 N 98, the Board of the Eurasian Economic Commission RESOLVED TO:
1. Approve the appended list of standards containing rules and methods of studies (tests) and measurements, including rules of taking samples, required to apply and meet requirements of the Technical Regulation of the Eurasian Economic Union “On Limitation of Use of Hazardous Substances in Electrical and Radio-Electronic Products” (TR EAEU 037/2016) and to assess conformity of products that are subject to technical regulation.
2. This Decision enters into force upon expiration of 30 calendar days from the date of its official publication.
Chairman of the Board
of the Eurasian Economic Commission
T.Sarkisyan
List of standards containing rules and methods of studies (tests) and measurements, including rules of taking samples, required to apply and meet requirements of the technical regulation of the eurasian economic union “On limitation of use of hazardous substances in electrical and radio-electronic products” (TR EAEU 037/2016), and to assess conformity of products that are subject to technical regulation
| N | Elements of the technical regulation of the Eurasian Economic Union | Designation of the standard | Name of the standard | Notes |
|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 |
| 1 | Annex 2 and 3 | GOST EN 50581-2016 | Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances | |
| 2 | GOST IEC 62321-1-2016 | Determination of certain substances in electrotechnical products. Part 1. Introduction and overview | ||
| 3 | GOST IEC 62321-2-2016 | Determination of certain substances in electrotechnical products. Part 2. Disassembly, disjunction and mechanical sample preparation | ||
| 4 | GOST IEC 62321-3-1-2016 | Determination of certain substances in electrotechnical products. Part 3-1. Screening. Lead, mercury, cadmium, total chromium and total bromine using X-ray fluorescence spectrometry | ||
| 5 | GOST IEC 62321-3-2-2016 | Determination of certain substances in electrotechnical products. Part 3-2. Screening. Total bromine in polymers and electronics by combustion – ion chromatography | ||
| 6 | GOST IEC 62321-4-2016 | Determination of certain substances in electrotechnical products. Part 4. Mercury in polymers and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS | ||
| 7 | GOST IEC 62321-5-2016 | Determination of certain substances in electrotechnical products. Part 5. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS | ||
| 8 | STB IEC 62321-2012 | Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) | ||
| 9 | STB IEC/PAS 62596-2012 | Electrotechnical products. Determination of restricted substances. Guidelines for sampling procedure | applies until 01.07.2019 |